IPv6 addresses come in many formats, each of which represent a different configuration. Like its predecessor IPv4, IPv6 addresses are structured into two main parts: an organizationally-assigned network prefix and a dynamically-assigned interface identifier.

The network prefix is typically either a /64, a /96, or a /128. The /64 is the most common as it represents a 128-bit network address. A /96 represents a 64-bit network address with a 64-bit subnet mask, and the /128 represents an individual IP address.

The interface identifier can be either:

A static global unicast address; A dynamic local address; A private address.

Subnet address

match the description to the ipv6 addressing component. (not all options are used.)

Subnet addresses are part of the network address and differentiate the network from other networks. This is accomplished by assigning a small block of addresses within the larger network address.

For example, imagine that the IPv6 network address was: AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:XXXX::/64

A subnet address could be AAAA:XXXX::/52, where 52 is the number of addresses in that subnet. Or it could be AAAA:XXXX::/48, where 48 is the number of addresses in that subnet. Both of these examples would be smaller networks within the /64 IPv6 network address.

Subnet addresses can be divided into even more divisions, called “subnets.” These are basically mini-networks inside your network. You can assign IPs in these subnets different functions, like having one for computers and one for printers.

Subnets can be any size, but there are recommended sizes based on how many devices you have on your network.

Interface address

match the description to the ipv6 addressing component. (not all options are used.)

The interface address is the address that a device uses to communicate with other devices. This could be a router connecting to other routers, or a computer connecting to other computers or routers.

IPv6 requires every device to have a unique interface address, so this must be defined when configuring IPv6 on a device. Most devices require you to assign it one of the global unicast addresses, which are assigned by the IPv6 authority: ICANN and the Internet Assigned Numbers Authority (IANA).

Unicast addresses are basically a device’s mailing address, like your home or work PC or phone number. Global unicast addresses are standardized addresses that all devices can receive. There are several types of global unicast addresses, and they all start with the prefix “2001:”. The last part of the address represents the specific device within that network.

There are also local unicast addresses which do not start with “2001:” but instead with another prefix, like “fc2a:” for example. These can be used in some situations but not in others depending on your network configuration.

Interface identifier

match the description to the ipv6 addressing component. (not all options are used.)

The interface identifier is the part of an IPv6 address that represents a network interface, usually a Wi-Fi or Ethernet connection.

The identifier is typically a 64-bit number, and it is either automatically generated by the device or manually assigned. For example, most devices automatically generate an identifier using the device’s MAC address as the base.

Manually assigning an identifier requires some knowledge of IPv6, as you must be able to generate a unique number. Depending on the protocol you are using to assign an identifier, it may require a certain length of numbers.

When using automatic generation, it is important to check that the ID is not repeated on any other device connected to the network. This can lead to issues with connectivity and security.

Local address

match the description to the ipv6 addressing component. (not all options are used.)

A local address is the address that is configured on the device. This can be either a unicast or multicast address, depending on your configuration.

If you are configuring a device for IPv6 via Stateless Address Configuration (SLAC) then a unicast address is configured automatically. If you are configuring a device for IPv6 via Configured Unicast Address then you must explicitly configure a unicast address.

Unicast addresses can be either global or local to the network. A global unicast address is an international IP address that can be routed across the internet. A local unicast address is an IP that is specific to a network and cannot be routed to other networks.

An IPv6 subnet can contain both global and local addresses, both of which are called “link-local” addresses because they are used only on the local link (network).

Group address

match the description to the ipv6 addressing component. (not all options are used.)

A group address is the same as a network address. The difference is that a group address represents all devices within an area, rather than specific devices.

Very often, all devices within a specific area need to communicate with each other. For example, all devices on the Internet need to know how to get to Google, Facebook, and other major sites.

When IPV6 was developed, it included the concept of a group address. This makes it easier to manage and organize addresses so that all devices on the Internet can be represented by one address.

In IPV4, we hadbroadcast addresses which represented all devices on a network. In IPV6, this was changed to link-local addresses which represent all devices within a specific network (i.e., LAN). These are similar in function but use different addressing components.

Site-local address

match the description to the ipv6 addressing component. (not all options are used.)

Site-local addresses were part of IPv6 and allowed for communication within a site, i.e. a campus or company network.

They were deprecated in 2003 due to security concerns as they could not be globally routed. This means that they could not be sent outside of the site-local address space which would cause problems.

Site-local addresses began with the prefix FEC and were comprised of 64 bits whereas global unicast addresses began with the prefix FC and were comprised of 48 bits.

Site-local addresses are no longer valid and have been replaced with unique local address which are only used within a specific administrative domain. They begin with the prefix FD and are comprised of 64 bits like site-local addresses.

Both are no longer used but if you find one, they cannot be used to communicate outside of your administrative domain.

Global unicast address

match the description to the ipv6 addressing component. (not all options are used.)

A global unicast address is the most common type of address and is what most people will use. It is designed for use in any kind of network, from small home networks to large enterprise and national networks.

Global unicast addresses are usually administered by an Internet registry (IR) who distributes them to the world through RIRs.

Most people will get a global unicast address from their ISP when they connect to the internet, though some networks may have their own global unicast address ranges. For example, Google Cloud uses the range 26 pathway:8 into:9 into:10 into:11 into:12 into:13 (2628|2630|2632|2634|2636|2638|263A) for internal networking.

……

IPv6 was designed with a total supply of 3.4×1038 addresses which would be enough for every person on earth to have trillions of addresses each! Unfortunately, we do not have that many yet, but there are ways to make up for it.

IPv6 default addressing uses a 64-bit subnet prefix length which creates 8 bit (64-bit) values per octet (8-bit segment). This creates 2^64=18 undecillion (2^64-1)=2^^71=10000000000000000000000000000 different subnet combinations! Even if we had that many IP addresses available, that would still be enough for every possible connection on earth.

IPv6 has many new features over its predecessor IPv4 such as simpler auto-configuration, better security mechanisms including built-in encryption capabilities at endpoints via IPsec implementations such as Windows Firewall Security Feature Set Extension Protocol Version 2 (WISFCPSECV2), Stateless Automatic Address Configuration (SLAAC), Privacy Extensions (SEcure Neighbor Discovery Protocol version 1(DSTM)), compressed headers via IP header compression NAT transparency via ICMP filtering etc., improved forwarding efficiency with unique next-hop identification via destination extended headers etc., improved mobility support due to longer term addressing via MIPv4 Mobile IP implementation etc., better quality assurance mechanisms like Flow Label field in header used in QoS settings etc., simplified router discovery protocol implementation using UDP port 546 insteadof BOOTP/DHCP which requires no external servers unlike DNS servers required by DNS based internet connectivity systems. .. . . .

Unique local address

match the description to the ipv6 addressing component. (not all options are used.)

A unique local address is an IPv6 address that is unique to a device, network, or subnet. It is also called a unicast address.

These are assigned to a device when it talks to a DHCP server. A DHCP server is a computer program that gives devices on a network settings such as IP addresses and DNS servers.

Unicast addresses can be fe80, dynamic, static, global multicast, and other special types.

When you have your own IPv6 connection through an ISP, they give you a unique local address. If you have multiple devices on your home network using an IPv6 connection, each will get its own unique local address.

Devices can also have more than one unicast address, but only one can be in use at any given time.

LEAVE A REPLY

Please enter your comment!
Please enter your name here