Excess load refers to the amount of weight that can be added to the normal loaded weight of an airplane. This includes cargo, passengers, and overall structure.
An aircraft’s maximum allowable takeoff (MTOW) is the heaviest configuration an aircraft can be in before it is unsafe to fly. This is due to issues such as stability, speed, and fuel capacity.
The Aeronautical Information Publication (AIP) defines MTOW as the heaviest takeoff configuration assuming a standard fuel load and distribution, crew member weight, luggage and cabin access provisions.
There are regulations that pertain specifically to excess load on airplanes due to safety concerns. These include the number of passengers that can be on the plane, how heavy the plane can be overall, and how much cargo can be on board. These regulations are put in place for safety concerns such as survivability in case of emergency landing or take off.
How strong the wing is

The amount of excess load that can be imposed on the wing of an airplane depends upon how strong the wing is.
If the wing is made of thin, weak material, then it will break under a large load. If the wing is thick and strong, then it can handle a larger load before breaking.
How strong the wing is is referred to as its strength coefficient and is measured using a parameter called torsion ratio. The torsion ratio measures how stiff the wing is in terms of twisting.
A higher torsion ratio means the wing is stronger and therefore able to handle a higher load before breaking. A lower torsion ratio means the wing is weaker and therefore more likely to break under heavy loads.
The strength coefficient varies based on what type of aircraft it is. For example, an aircraft designed to carry cargo will have a different strength coefficient than one designed for combat operations.
The angle of attack

The angle of attack or AOA is the angle between the chord line of the airplane’s wing and the direction of motion.
This term is important to understand because the AOA of the airplane’s wing directly impacts how much load can be imposed on it.
As mentioned before, when a plane lands, the wind force acting on it is greater than that acting on it when in flight. This is because the air beneath it is moving faster and therefore has more force.
The higher wind speed causes the plane to land sooner, which means there is less time for the wings to generate lift. Because of this, an excess load may be imposed on the wings due to less time for circulation.
A very simple way to reduce this excess load is to increase the AOA of the wing. By doing this, more time will be given for circulation and less excess load will be imposed on the wing.
The size of the load

The size of the load that can be imposed on the wing of an airplane depends upon the strength of the wing.
Stronger wings can handle higher loads. Less strong wings can handle lower loads. There is no absolute standard for how strong a wing must be, however. It all depends upon the purpose of the airplane.
For example, the wings of military fighter jets are made very strong because their purpose is to fight in air combat. They need to be able to withstand severe stresses and strains while maneuvering at high speeds.
The wings of a cargo plane, however, do not need to be as strong because they do not experience as many stresses and strains while in flight. Their purpose is simply to transport cargo, not fight in air combat or transport people.
A weaker wing may still be sufficient for its intended purpose.
The material used for the wing

As mentioned before, the material used to make the wing of an airplane can have a significant impact on how much excess load can be imposed on it.
Stronger materials, like steel, can withstand more load than lighter materials, like aluminum. However, steel is much heavier than aluminum, so airplanes with steel wings will be heavier and consume more fuel to fly.
Besides weight, other properties of the material such as durability and cost influence which material is used to make the wing. If an airplane needs a wing that can withstand a certain amount of excess load, then the designer chooses the strongest material that costs reasonably to produce this effect.
Testing loads before putting an airplane into service ensures that it can handle enough excess load without breaking any parts.
The design of the wing

In order to understand how the amount of excess load on the wing is determined, it is important to understand the design of the wing.
The shape of the wing plays a major role in how much load can be imposed on it. A shorter and thinner wing will be weaker than a longer and thicker wing. This is because less material will be used to make the thinner wing, which will make it weigh less.
The thickness of the wing also plays a role in its strength. A thicker wing will take more force to break or cause it to deform. This prevents it from taking on too much load and failing due to stress caused by turbulence or heavy loads.
The placement of the wings also matters when considering turbulence. Wings that are higher up on the plane are more likely to experience fatigue due to turbulence because they experience more shaking. Lower wings tend to be stronger due to this fact.
Whether the plane is taking off or landing

Another factor that determines how much weight can be on the wing is whether the plane is taking off or landing. When a plane is taking off, the wings are mainly stressed by upward forces.
When the plane is landing, the wings are stressed by both downward and upward forces. Since takeoffs are when the aircraft is in motion, upward forces are primarily what stress the wings.
Landings are when both upward and downward forces are exerted on the wings, which makes it more difficult for the aircraft to stay stable. The amount of excess load that can be imposed on the wing depends upon whether the plane is taking off or landing.
Given this information, it would make sense to have different safety limits depending on if the aircraft is taking off or landing. Both of these situations affect how much weight can be imposed on an airplane’s wing.
The altitude of the plane
Pilots are highly trained individuals who spend years studying aviation and flight. The average person does not have the knowledge or expertise to control an aircraft like a pilot can.
Because of this, most average people would not know that the amount of excess load that an airplane wing can handle depends on the altitude of the plane.
Curves in a runway may also play a role in how much load a wing can handle, but this is only true at lower altitudes. At higher altitudes, the curve does not matter because there is no friction between the wing and the air.
The reason for this is because air behaves like a fluid at high altitudes, so there is no longer any friction between the wing and the air.
The speed of the plane

As the plane flies faster, the amount of excess load that can be imposed on the wing increases. This is because the wing has less time to react to the load.
If a heavy object is thrown at a slow speed, the object has time to move out of the way of the wing. However, if it was thrown at a high speed, it would hit the wing with no time to avoid it.
Therefore, at higher speeds, the loading factor must be higher in order to ensure safety. This is important to remember when wondering why some planes can seem overly heavy at certain speeds.
The average person may not think about this, but aviation professionals always keep this in mind when handling aircrafts and loading them with cargo and passengers.


