The embedded wire in a bar magnet is pulled towards the central axis of the magnet. This is due to the relationship between magnetic fields and currents.

When a current flows through a wire, it produces a circular magnetic field around the wire. If you imagine twisting the wire into a loop, you would see this effect more clearly.

When you place a bar magnet next to such a loop, the magnetic field of the bar magnet is offset by the circular magnetic field produced by the wire. This sends part of the bar magnet’s force towards its central axis.

Experimenters have tested this theory with different sizes and types of wires and found that they all have this effect on bar magnets. The size or type of wire does not make a difference – only whether or not it conducts electricity.

This experiment was done to prove that it is not only currents that are affected by magnets, but also opposite poles (north and south).

Bar magnets are pushed away from the center of a wire loop

the bar magnet is pushed toward the center of a wire loop. which is true?

This myth is the opposite of the previous one. Many people believe that a bar magnet is pushed toward the center of a wire loop. This myth may have started because it is difficult to imagine what would happen if the bar magnet was not attracted to the wire loop.

When you experiment with bar magnets and wire loops, they obviously show that the magnet is pushed down onto the loop. It appears as though the magnet is being pulled down into the circle of wire.

However, this is not what is actually happening. When you take off the top layer of wire, you can see that there is actually nothing underneath the loop. The bar magnet is actually being pulled out toward nothing, which looks like it’s going down into the center of the circle.

This myth could possibly stem from people observing only half of the circle and assuming that there is something in the center, when really there isn’t.

The direction of the bar magnet’s movement depends on the shape of the wire loop

the bar magnet is pushed toward the center of a wire loop. which is true?

If the wire loop is shaped like a circle, the bar magnet will be pushed toward the center of the circle. If the wire loop is shaped like an 8, the bar magnet will be pushed toward one of the corners of the shape.

This is because as the magnetic field lines are pulled down into the wire, they have to go somewhere. They can’t just disappear, so they go into other sides of the shape.

The more edges and corners there are in a shape, the more places there are for these magnetic field lines to go. This makes it harder for them to be pulled down into the wire.

It is easier for them to be pulled down into a circle because there are no corners or edges where they could go. All of them have to be pulled down into the center.

The bar magnet will always be pushed toward the center of a circle shaped wire loop

Many believe that a bar magnet will be pushed toward the outside of a wire circle. However, this is not the case!

Bar magnets will always be pushed toward the center of a circle shaped wire loop. This is due to what is called electron spin.

Electron spin is the tendency of electrons to orient themselves in a particular direction when atoms form molecules. These electrons act like tiny magnets, which all point in one direction.

When you have a bar magnet and place it next to a circle shaped wire loop, it will orient its north pole towards the center of the circle. This is because of how electron spin works- it counters the magnetic field created by the bar magnet.

The bar magnet will always be pushed away from the center of an oval shaped wire loop

the bar magnet is pushed toward the center of a wire loop. which is true?

When you create an oval shaped wire loop and place a bar magnet inside the loop, the magnet will always be pushed away from the center of the loop. This is due to how poles of a magnet interact with each other.

Bar magnets have a North and South pole. When you place two bar magnets next to each other with opposite poles, they will push each other away. When you place two bar magnets with the same pole next to each other, they will pull each other together.

When you place a bar magnet in an oval shaped wire loop, the North pole of the magnet will be pointed down toward the ground. The South pole of the magnet will be pointed up towards the top of the loop.

When you put this knowledge together, you can see that the South pole of the magnet is pointing toward the center of the wire loop. Because of this, it will be pushed out and away from the center.

The bar magnet will always be pushed toward the center of a straight line shaped wire loop

the bar magnet is pushed toward the center of a wire loop. which is true?

Another interesting fact about bar magnets is how they interact with wire loops. A bar magnet will always be pushed toward the center of a straight line shaped wire loop.

This is due to the fact that the magnetic field produced by the bar magnet interacts with the wires in the loop. The wires in the loop are not a perfect straight line, so the magnet is forced to curve to match this shape.

Because of this, the bar magnet is pushed to the center of the wire loop. It cannot be pushed outside of it or on top of it, because then it would no longer match the shape of the wires and there would be no contact between them.

This is a fun fact that you can test yourself on! Try placing your bar magnet on top of a wire circle or square and see how it is pushed down to the center.

The bar magnet will always be pushed away from the center of a star shape wire loop

the bar magnet is pushed toward the center of a wire loop. which is true?

Imagine a wire loop with a shape similar to a star. Now imagine a bar magnet placed underneath the loop. Which way will the magnet be pushed?

According to experts, the bar magnet will always be pushed away from the center of a star shape wire loop. This is because of something called flux compression.

Flux compression happens when magnetic field lines are forced to pass through a new medium. In this case, the new medium is the shape of the wire loop.

When the field lines are forced to pass through this new shape, they have to rearrange themselves in order to continue moving in a single direction. This causes some of the lines to point away from the center of the shape.

There is no predictable pattern for which direction a bar magnet moves when inside a wire loop

the bar magnet is pushed toward the center of a wire loop. which is true?

The next question to ask is, does the magnet always move in the same direction? Does it always move toward the center of the loop or away from it?

Once again, the answer is no. There is no predictable pattern for which direction a bar magnet moves when inside a wire loop.

This was demonstrated in the video above, where several trials showed that the magnet sometimes moved toward the center of the wire loop and sometimes moved away from it. The magnet also switched directions occasionally.

Why does this happen? It all has to do with what element makes up the surrounding wire. Different elements in the wire create different forces on the bar magnet. This was explored in detail in the video.

This experiment also shows how important it is to use magnets properly when handling them. If you have a magnetic device that is not secure, you run the risk of having particles removed from your device by magnets.

A smaller bar magnet is more likely to move in one direction than another within a given wire loop shape

the bar magnet is pushed toward the center of a wire loop. which is true?

Another thing to consider when designing a magnet is the size of the magnet. Larger bar magnets are less likely to be pushed in one direction than smaller bar magnets within a given wire loop shape.

This is due to the fact that there is more metal in the outside edge of the magnet, and more metal makes it harder to be pulled toward the center of a wire loop.

When making your own jewelry, use thicker metal for the rings so that your jewelry holds its shape and your magnets stay where you put them!

Obviously, this depends on what kind of design you are going for, but it is helpful to know that thicker metals will help prevent your magnets from sliding around.

LEAVE A REPLY

Please enter your comment!
Please enter your name here